coaxial cable fl086 model series the big deal product overview the fl086 series flexible coaxial cables are ideal for interconnection of coaxial components or sub-systems. the construction includes a silver-plated copper-clad steel center conductor. the outer shield is copper braid, tin soaked, which minimizes signal leakage and at the same time fexible for easy bend. dielectric is low loss ptfe. sma-male connector have passivated stainless-steel coupling nut over a gold plated body with a gold plated brass center conductor. n-male connector have brass coupling nut over a nickle plated body with a gold plated brass center conductor. the fl086 series flexible cables are available in variety of length to meet your requirements. key features case style: se2635-xx xx= cable length in inches ? flexible ? tight bend radius, 6mm ? excellent return loss and insertion loss ? ideal for interconnect of assembled systems 50 ? dc to 18 ghz feature advantages flexible rf cables the fl086 series flexible cables are ideal for use integrating coaxial components and sub- assemblies without the need for special cable-bending tools and alleviating the risk of damage during the bending process typical of semi-rigid coaxial cable assemblies. tight bend radius: 6mm capable of only 6mm bend radius, the fl086 flexible series is able to make connections in tight spaces making these cables ideal for dense system integration excellent return loss ? 25 db typ. at 6 ghz ? 21 db typ. at 18 ghz the fl086 series flexible cables are ideally suited for interconnecting a wide variety of rf components while minimizing vswr ripple contribution due to mating cables & connectors. good power handling capability: ? 57w at 0.5 ghz ? 33w at 18 ghz mini-circuits fl086 cable series can support medium to high rf power levels enabling these cables to be used in the transmit path. note: power rating is at sea-level altitudes. flexible notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
rev. or m167827 FL086-12SMNM+ wp/cp/am 180509 features ? wideband frequency coverage, dc to 18 ghz ? low loss, 0.95 db typ. at 18 ghz ? excellent return loss, 21 db typ. at 18 ghz ? flexible ? 6mm bend radius for tight installations ? insulated outer jacket standard ? connector interface, meets mil-std-348 ? ideal for interconnect of assembled systems applications ? replacement for custom bent 0.086" semi-rigid cables ? communication receivers and transmitters ? military and aerospace systems ? environmental and test chambers ? test accessory 50 ? 12 inch dc to 18 ghz case style: se2635-12 FL086-12SMNM+ outline dimensions ( ) inch mm coaxial cable cable construction outline drawing maximum ratings operating temperature -55c to 105c storage temperature -55c to 105c power handling at 25c, 198w at 0.5 ghz sea level 140w at 1 ghz 99w at 2 ghz 57w at 6 ghz 45w at 10 ghz 33w at 18 ghz permanent damage may occur if any of these limits are exceeded. connectors model sma-male - n-male FL086-12SMNM+ 1. custom sizes available, consult factory. typical performance data 0.0 0.2 0.4 0.6 0.8 1.0 0 3000 6000 9000 12000 15000 18000 insertion loss (db) frequency (mhz) FL086-12SMNM+ insertion loss frequency (mhz) insertion loss (db) return loss (db) sma-male n-male 0 10 20 30 40 50 0 3000 6000 9000 12000 15000 18000 return loss (db) frequency (mhz) FL086-12SMNM+ return loss sma-male n-male 100 0.07 43.5 45.9 1000 0.23 38.4 38.3 2000 0.33 45.5 45.9 2500 0.37 38.6 38.7 4000 0.48 36.7 31.5 5000 0.54 33.2 29.0 6000 0.59 26.9 25.7 7000 0.66 21.3 23.5 8000 0.67 23.3 24.9 9000 0.68 26.6 27.2 10000 0.67 24.6 22.5 12000 0.71 31.6 36.7 14000 0.80 30.9 26.9 17000 0.86 21.9 21.2 18000 0.95 21.8 22.4 electrical specifcations at 25c parameter condition (ghz) min. typ. max. unit frequency range dc 18 ghz length 1 12 inches insertion loss dc - 2 0.2 0.6 db 2 - 6 0.4 1.0 6 - 10 0.6 1.3 10 - 18 0.7 1.7 return loss dc - 2 23 43 db 2 - 6 23 40 6 - 10 18 28 10 - 18 18 25 flexible a b c1 c2 d e1 12.0 .36 .313 -- .88 .750 304.80 9.14 7.95 -- 22 19.05 e2 t wt .375 0.1 grams 9.5 2.54 42.92 f 0.106.004 2.640.1 center conductor: silver plated copper clad steel dielectric: fine powder ptfe inner shield: silver plated copper tape outer shield: silver plated copper braid jacket: fep, blue sma-male connector: - coupling nut: stainless steel passivated - body: stainless steel gold plated - center pin: brass, gold plated (unjacketed cable also availabe upon request ) n-male connector: - coupling nut: brass, nickel plated - body: brass, nickel plated - center pin: brass, gold plated notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
